Engineered to comply with SASO, SEC (Saudi Electricity Company), and Aramco standards. Operating reliably under extreme ambient temperatures exceeding 55°C.
Operating electrical infrastructure in the Kingdom of Saudi Arabia (KSA) demands an engineering approach that goes far beyond standard off-the-shelf industrial catalogues. Electrical installations across the Rub' al Khali desert, the industrial cities of Jubail and Yanbu, and the high-density megaprojects along the Red Sea face an uncompromising combination of environmental stressors: ambient temperatures exceeding 55°C, extreme solar radiation, highly abrasive fine sandstorms (haboobs), and severe coastal salinity.
As an established global original equipment manufacturer (OEM) and custom system integrator backed by over 38 years of power conversion expertise, our engineering team supplies tailor-made power distribution boxes, step-down transformers, automatic transfer switch (ATS) cabinets, and DC UPS systems explicitly customized for Saudi Arabia’s grid code (SEC TES standards) and Saudi Aramco engineering specifications (SAES).
Standard power supplies experience severe capacity drop-offs above 40°C. Our Saudi-spec platforms use heavy copper busbars, custom heat-sink geometries, and forced-air or liquid-chilled designs to maintain 100% continuous output at 55°C ambient.
Fine particulate dust in desert environments destroys cooling fans and creates conductive creepage paths. We build customized IP65, IP67, and NEMA 4X enclosures featuring double-gasket seals and labyrinth air paths.
Fully integrated digital control boards supporting DNP3 (serial & TCP), Modbus RTU/TCP, and IEC 61850 protocol mapping for seamless integration into SEC grid automation and private industrial SCADA systems.
Our power distribution cabinets, oil-immersed transformers, and rack-mount smart PDUs are field-proven across critical Saudi Arabian industrial sectors.
In 110kV/220kV/380kV substations managed by the Saudi Electricity Company (SEC), continuous DC power is required for protective relay tripping, switchgear actuation, and telemetry communications. Our custom 110V/220V DC UPS platforms and 10kV step-down distribution transformers provide reliable backup power and stable medium-to-low voltage stepping under continuous high-thermal stress.
Saudi Vision 2030 megaprojects rely on large-scale solar PV and energy storage system (ESS) microgrids. We supply custom IP67 aluminum alloy power junction units, ATS control cabinets, and smart vertical PDUs engineered for 100% renewable islanded grids, providing seamless power transfer between utility feeds, battery banks, and backup diesel generators.
In hydrocarbon refineries, gas plants, and chemical complexes in Jubail and Yanbu, power reliability is tied to operational safety. Our custom 3-phase heavy-duty power distribution panels and explosion-proof enclosures undergo stringent factory testing to handle transient surge immunity, high fault currents, and harsh chemical airborne exposure.
Cellular connectivity along Saudi Arabia's desert highways requires reliable 48V DC power systems. Our smart rack-mount PDUs with RS485 communication, combined with maintenance-free ABS outdoor distribution boxes, enable remote monitoring of current consumption, temperature thresholds, and circuit breaker status via centralized network management tools.
Driven by the National Industrial Development and Logistics Program (NIDLP) and Vision 2030 initiatives, Saudi Arabia's power sector is undergoing a rapid transition toward digital grid infrastructure, localization, and high-efficiency power equipment.
| Market Driver | Traditional Approach in KSA | Vision 2030 Modern Standard | Our OEM Engineering Advantage |
|---|---|---|---|
| Grid Reliability | Manual switchgear changeovers & passive distribution boxes. | Automated ATS cabinets with smart SCADA monitoring & IP54+ sealing. | Pre-configured ATS panels with dual-power 220V/380V switching and dry-contact alarm triggers. |
| Ambient Thermal Limits | Derating standard European/Asian equipment by up to 30-40%. | Specifying equipment certified for continuous 50°C - 55°C operation. | High-efficiency copper windings, aluminum alloy heat sinks, and customized thermal airflow paths. |
| Enclosure Protection | Basic IP54 indoor painted steel panels prone to corrosion. | IP65 to IP67 UV-stabilized ABS, polycarbonate, or corrosion-resistant aluminum. | Modular plastic and extruded alloy boxes built to resist desert UV exposure and marine salinity. |
| Data Center & Telecom | Unmonitored basic AC power distribution strips. | Smart meterable rack-mount PDUs with RS485 SNMP protocol integration. | Director-level switched vertical/horizontal PDUs with individual outlet monitoring. |
Consulting engineers and EPC contractors can use this reference matrix to match project specifications against our core custom manufacturing capabilities.
| System Category | Target Power Rating | Ingress & Material Spec | Primary Saudi Application | Inquiry Link |
|---|---|---|---|---|
| Shangyi Aluminum Power Box | 16A, 110V-10kV, 50/60Hz | IP67 Anodized Aluminum Alloy | Harsh outdoor junction, mining, marine sites | Inquire |
| 10kV Step Down Transformer | 100kVA, 10kV / 400V 3-Phase | Hermetically Sealed Oil-Immersed | Rural substations, remote solar sites, industrial hubs | Inquire |
| Automatic Transfer Switch (ATS) | 220V / 380V Industrial ATS | IP54 Heavy-Gauge Steel Enclosure | Emergency standby generator switching, healthcare, data centers | Inquire |
| Outdoor ABS Socket Box | 16A - 32A, 220V Single Phase | IP67 ABS Housing with Lockable Lid | Temporary site power, construction zones, outdoor venues | Inquire |
| Rack Mount Director PDU | Global Standard 19" Rack Mount | Steel Chassis with RS485 Modbus | Saudi Telecom (STC) edge servers, enterprise data centers | Inquire |
Expert insights regarding local certification, temperature derating, custom manufacturing, and logistics to Riyadh, Jeddah, Dammam, and Jubail.
All our export-grade electrical distribution equipment, ATS cabinets, and step-down transformers comply with IEC standards (IEC 61439 for low-voltage switchgear, IEC 60076 for transformers). We work directly with accredited notified bodies to issue SASO Certificate of Conformity (CoC) via the SABER online portal, ensuring smooth customs clearance at Saudi ports including Port of Dammam, Jeddah Islamic Port, and King Abdulaziz Port.
Standard rating calculations assume an ambient temperature of 40°C. For installation in Saudi desert areas where enclosure ambient temperatures can reach 55°C to 60°C under direct solar radiation, we apply a thermal derating factor (typically 0.80 to 0.85 depending on internal dissipation) or integrate upgraded copper busbars and active thermal management to deliver full rated load without thermal trip events.
Yes. Over 50% of our manufactured volume consists of custom-engineered platforms. Our engineering team can adjust sheet metal dimensions, circuit breaker brand preferences (e.g., ABB, Schneider, Siemens), busbar ampacity, gland plate drillings, auxiliary contact alarm outputs, and paint shade (e.g., RAL 7032 / RAL 7035) to match approved vendor lists (AVL) or specific project submittal requirements.
For indoor switch rooms or air-conditioned control containers, IP54 enclosures provide adequate protection against dust buildup. However, for outdoor installations in Riyadh, Al-Khobar, or remote desert sites subject to haboobs (sandstorms), we strongly recommend IP65 or IP67 aluminum alloy or UV-resistant ABS enclosures equipped with neoprene gasketing and breathers to equalize pressure without letting fine dust inside.
Our smart rack-mount PDUs and ATS cabinets support RS485 Modbus RTU, Modbus TCP/IP, and SNMP protocols. This allows facilities managers and electrical engineers to monitor phase voltages, current draw, power factor, and alarm conditions in real time from a centralized SCADA or Building Management System (BMS).
Standard modular distribution boxes are available from stock or standard assembly lines within 1 to 2 weeks. Custom OEM electrical control panels, ATS cabinets, and 10kV transformers typically require 3 to 5 weeks for complete fabrication, wiring, quality testing, and ISO 9001 Factory Acceptance Testing (FAT). Air freight (3-5 days to RUH/JED/DMM) or sea freight (18-25 days) can be arranged based on project urgency.
Delivering field-proven reliability, comprehensive factory acceptance testing, and direct regional engineering support.
Unlike basic trading companies, our facility houses comprehensive electrical, mechanical, and thermal design teams. From schematic drafting to structural CAD layout, wiring assembly, and protocol verification, every unit is built under strict ISO 9001:2015 quality control processes.
Supported by our regional hub network across the Middle East (Dubai support team), we provide localized technical consultation, spare parts availability, and Factory Acceptance Testing (FAT) witnessing. Clients receive full testing documentation prior to dispatch.
Send us your load profile, enclosure dimensions, or electrical single-line diagram (SLD). Our application engineers will evaluate your specification and deliver a detailed engineering quotation.
